Comments sought on new build: A CNC Router for RC Gliders and Planes

**Clive S** · 01-04-2015

Started on some wiring of the power circuit....

I see you have the right tool at the ready.

.Clive

**JAZZCNC** · 01-04-2015

Originally Posted by Clive S

I see you have the right tool at the ready.

.Clive

My mate locked away all my hammers after my last keyboard smashing hissy Fit.! .

**m.marino** · 02-04-2015

What size box are you using there. I am being dense today and can't find it in the thread earlier (I know it is most likely there but just being thick today) Nice set up by the way and may borrow some of your design set up with the rebuild I am in the process of (If you don't mind).

Michael

PS yes when the hammer looks like a solution that is bothering me; it is time to go for a walk or have a cuppa in the house and not touch anything that can break.

**njhussey** · 02-04-2015

I might not have put the size here Michael so it's probably not you. It's 600 x 600 x 300, feel free to copy anything as most of my inspiration has come from seeing others builds, it's only what I think is a good layout for the control cabinet as I've tried to keep all power items to the left with noisy ones (power supply) to the bottom right as far away from the drives as possible as suggested by Dean.

**JAZZCNC** · 02-04-2015

Originally Posted by njhussey

it's only what I think is a good layout for the control cabinet as I've tried to keep all power items to the left with noisy ones (power supply) to the bottom right as far away from the drives as possible as suggested by Dean.

Wow don't blame me.!!. . .