Comments sought on new build: A CNC Router for RC Gliders and Planes

[njhussey]

Ah I now remember you are going to mount it vertical. But you will still have to have the continuity of the screens in the JB. ..Clive

Still umming and arring about the JB, makes it a more modular solution but then gives more scope to introduce areas that could cause problems....

The advert says they're for 57mm motors, not 60mm, so yes... be cautious.

I think I'll make some myself when the machine is up and running, although it'll be tight for the Z axis motor as it's quite near the plate.....and I've got a Nema 34 on the X axis......