Hybrid View
-
13-08-2010 #1
Cheers Stu, I reckon I've spent just a smidge under £180 so far, as I'm making the rest out of scrap bits from work I don't think there's too much extra to come in terms of expense. I've an old PC that I'm planning to use, might get a 15" flat screen to save space. All the machining I'm planning to do myself, might pay to get the steel plates cut for me by one of our work suppliers, been quoted £17 per gantry side and £6 per skate housing side which comes to £130...but still might do it mysef yet. Will probably try the first one and see how it goes!
Neil
-
15-08-2010 #2
Just gone through my purchases to date and costs are as follows:
30 x 608 2RS 8MM BALL BEARING SKATEBOARD = £11.91
6 x micro switch V3 type microswitch 16 amp = £4.19
1 x Aluminium Plate 105x103x15mm = £4.80
1 x 3 Axis TB6560 Stepper Motor Driver Board Controller = £41.67
1 x Acetal plastic sheet 215x110x20 = £10.23
1 x 10mm Round Bright Mild Steel = £2.10
1 x 250W 24V 10A Switching Power Supply = £21.29
1 x 1000mm TR12x3D Trapezoidal Spindle - Acme Ballscrew Leadscrew = £20.30
1 x 500mm TR12x3D Trapezoidal Spindle - Acme Ballscrew Leadscrew = £5.70
1 x 100mm TR12x3D Trapezoidal Spindle - Acme Ballscrew Leadscrew = £3.08
1 x Performance pro 701w rotary cutter = £15.00
1 x 8mm Round Bright Mild Steel = £1.65
1 x 200mm TR10x2D Trapezoidal Spindle - Acme Ballscrew Leadscrew = £3.96
3 x Stepper Motor MINEBEA Astrosyn 23LM-C355-P6V = £23.99
Total so far....£169.87
I'm back at work tomorrow (had 2 weeks off) so will begin machining and turning (in my lunch times) to make a skate-o-rail housing to test the theory! Been doing more draughting today, looking to support the 1" NB pipe by welding to 40 x 40 angle and also to put a 6mm steel web betwen the 3/4" gantry rails for support. should stiffen things up a bit!!
NeilLast edited by njhussey; 15-08-2010 at 04:16 PM.
Thread Information
Users Browsing this Thread
There are currently 18 users browsing this thread. (0 members and 18 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM -
CNC construction TUNISIA give your comments
By ali hedi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 06-07-2011, 11:58 PM
Bookmarks