Threaded View
-
15-08-2010 #8
Just gone through my purchases to date and costs are as follows:
30 x 608 2RS 8MM BALL BEARING SKATEBOARD = £11.91
6 x micro switch V3 type microswitch 16 amp = £4.19
1 x Aluminium Plate 105x103x15mm = £4.80
1 x 3 Axis TB6560 Stepper Motor Driver Board Controller = £41.67
1 x Acetal plastic sheet 215x110x20 = £10.23
1 x 10mm Round Bright Mild Steel = £2.10
1 x 250W 24V 10A Switching Power Supply = £21.29
1 x 1000mm TR12x3D Trapezoidal Spindle - Acme Ballscrew Leadscrew = £20.30
1 x 500mm TR12x3D Trapezoidal Spindle - Acme Ballscrew Leadscrew = £5.70
1 x 100mm TR12x3D Trapezoidal Spindle - Acme Ballscrew Leadscrew = £3.08
1 x Performance pro 701w rotary cutter = £15.00
1 x 8mm Round Bright Mild Steel = £1.65
1 x 200mm TR10x2D Trapezoidal Spindle - Acme Ballscrew Leadscrew = £3.96
3 x Stepper Motor MINEBEA Astrosyn 23LM-C355-P6V = £23.99
Total so far....£169.87
I'm back at work tomorrow (had 2 weeks off) so will begin machining and turning (in my lunch times) to make a skate-o-rail housing to test the theory! Been doing more draughting today, looking to support the 1" NB pipe by welding to 40 x 40 angle and also to put a 6mm steel web betwen the 3/4" gantry rails for support. should stiffen things up a bit!!
NeilLast edited by njhussey; 15-08-2010 at 04:16 PM.
Thread Information
Users Browsing this Thread
There are currently 18 users browsing this thread. (0 members and 18 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM -
CNC construction TUNISIA give your comments
By ali hedi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 06-07-2011, 11:58 PM
Bookmarks