Threaded View
-
14-09-2013 #10
Cheers Jazz ill look at the design again and take into account your comments...
This afty was finishing the shed off. Well nearly as got to go out in a bit so had to stop. Its all done apart from the boards on the roof edge at one end but as the boards need altering I've run out if time. Given it a coat of clear preservative so should be ok when it rains. Still needs another couple of coats to be on the safe side.
Thread Information
Users Browsing this Thread
There are currently 84 users browsing this thread. (0 members and 84 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM -
CNC construction TUNISIA give your comments
By ali hedi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 06-07-2011, 11:58 PM
Bookmarks