. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    I was thinking along the lines of this, but measuring it is just over 2000mm long so might have to re-think it...oh and before someone comments I know it will have to be a belt and not a piece of string

    Click image for larger version. 

Name:	X axis belt.jpg 
Views:	640 
Size:	194.9 KB 
ID:	10164
    Neil...

    Build log...here

  2. #2
    Nice bit of string you've got there ;-)

    Looks like your coming to much the same conclusion I did. I'm sure a belt will work but it's certainly a long belt. I decided I'd rather use two steppers and have the open back that I could shove long work out if needed. Feels like one of those six of one half a dozen of the other decisions.

  3. #3
    I'm not planning on being able to shove long work in and out, won't be practical anyway as I'm limited by the roof and floor as mine's almost vertical. I've just added some bracing to the legs so that's made the cutting area smaller with my previous width of Z axis....so I've narrowed it. I'm hoping that it's not too narrow, it's now 145mm wide. I'll have to check the 15mm carriages but I think they'll be ok at that width...

    Click image for larger version. 

Name:	Additional Frame Bracing.jpg 
Views:	572 
Size:	298.2 KB 
ID:	10165Click image for larger version. 

Name:	Additional Frame Bracing-2.jpg 
Views:	529 
Size:	469.1 KB 
ID:	10166
    Neil...

    Build log...here

  4. #4
    Just been looking at PV solar panels, leisure batteries and charge controllers for the shed so I can have some 12V LED lighting in there as well as being able to charge my RC LIPOs etc...interesting little project

    Broken the different frames out and coloured them so they stand out a bit more, also did it with them all together.

    Click image for larger version. 

Name:	Mounting Frame.jpg 
Views:	513 
Size:	167.7 KB 
ID:	10172Click image for larger version. 

Name:	Router Frame.jpg 
Views:	615 
Size:	373.3 KB 
ID:	10173Click image for larger version. 

Name:	Inclined Rev 6 CNC Router.jpg 
Views:	616 
Size:	301.1 KB 
ID:	10171
    Neil...

    Build log...here

  5. #5
    I've got a friend who's PV mad, he's just bought a load of panels so I can ask him what he's got if you'd like?

  6. #6
    Yes if you could please. I am looking at 2 leisure batteries 115ah each, 2 x 100w panels and a 20A charge controller. All in about £250.00
    Neil...

    Build log...here

  7. #7
    I've got two 92Ah 12V batteries that I'd consider selling. They're these ones:
    Enersys PowerSafe 12V92F - 12V 92Ah VRLA Battery £0.00 - Industrial Batteries - High Rate VRLA - Enersys V Range - Front Terminal FIAMM Batteries | C&D Technologies Batteries | YUASA Batteries | Enersys Batteries | Scooter Batteries | Lawnmower Batte
    I've barely used them, but had them a while. I've charged them every few months though to stop them degrading. No idea what they're worth..

    For the solar panels you're best off looking on eBay. A few months ago I got four new certified 190W panels for £120 each, then another two the same for £100 each. They're now on the shed roof and grid tied with an inverter also from eBay.
    Old router build log here. New router build log here. Lathe build log here.
    Electric motorbike project here.

Thread Information

Users Browsing this Thread

There are currently 80 users browsing this thread. (0 members and 80 guests)

Similar Threads

  1. Does anyone want to build me a cnc router?
    By totally useless in forum Open Source Designs & Plans
    Replies: 25
    Last Post: 05-05-2014, 12:44 AM
  2. My new, and first build....comments greatfully received
    By berk in forum Gantry/Router Machines & Building
    Replies: 7
    Last Post: 12-01-2014, 03:15 PM
  3. BUILD LOG: CNC Router New Build
    By PilotTom in forum DIY Router Build Logs
    Replies: 12
    Last Post: 25-05-2013, 03:49 PM
  4. BUILD LOG: A3 Router Build
    By GTJim in forum DIY Router Build Logs
    Replies: 6
    Last Post: 17-02-2012, 12:53 PM
  5. CNC construction TUNISIA give your comments
    By ali hedi in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 06-07-2011, 11:58 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •