Hybrid View
-
18-09-2013 #1
Just been looking at PV solar panels, leisure batteries and charge controllers for the shed so I can have some 12V LED lighting in there as well as being able to charge my RC LIPOs etc...interesting little project
Broken the different frames out and coloured them so they stand out a bit more, also did it with them all together.
-
18-09-2013 #2
I've got a friend who's PV mad, he's just bought a load of panels so I can ask him what he's got if you'd like?
-
18-09-2013 #3
Yes if you could please. I am looking at 2 leisure batteries 115ah each, 2 x 100w panels and a 20A charge controller. All in about £250.00
-
18-09-2013 #4
I've got two 92Ah 12V batteries that I'd consider selling. They're these ones:
Enersys PowerSafe 12V92F - 12V 92Ah VRLA Battery £0.00 - Industrial Batteries - High Rate VRLA - Enersys V Range - Front Terminal FIAMM Batteries | C&D Technologies Batteries | YUASA Batteries | Enersys Batteries | Scooter Batteries | Lawnmower Batte
I've barely used them, but had them a while. I've charged them every few months though to stop them degrading. No idea what they're worth..
For the solar panels you're best off looking on eBay. A few months ago I got four new certified 190W panels for £120 each, then another two the same for £100 each. They're now on the shed roof and grid tied with an inverter also from eBay.
-
18-09-2013 #5
That's where I was looking, on ebay. The batteries that I was looking at are these 2 X 12v NEW 110AH LOW HEIGHT LEISURE BATTERIES NEW | eBay, the panels are these ones 200W solar panels-2x100W 12V Photovoltaic PV Solar Panel Module 12V RV Boat | eBay and the charge controller is this one Biard 20 Amp Solar PV Panel Charge Controller - Protects Battery - LED Indicator | eBay
Not so sure I'll grid tie them but might look at an inverter to run some bits in the shed as I'm in rented accommodation now and don't want to pay for altering the electrics. If I do look at getting an inverter then I might get more batteries and solar panels as I'm only going to be in the shed for a couple of hours every evening (well only if SWMBO allows!) and on the weekends.
Certainly something to look into!
-
18-09-2013 #6
I heard back from my friend, he reckons you'll be doing well to get it all for £250 (at least if it's all new). The panels will probably go up in price quite a bit, he reckons you'll end up paying about £100 per 100W panel. Also don't forget that unless you can charge the heli batteries direct from the LA batteries you'll need an inverter a decent one of which will set you back a bit.
-
18-09-2013 #7
Yes I wasn't looking properly, the panels are about £100 each! I can connect the batteries in series to get 24V so I can charge my batteries (5000mAh 6 cell 22.2V ones) in parallel with my large charger.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM -
CNC construction TUNISIA give your comments
By ali hedi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 06-07-2011, 11:58 PM
Bookmarks