Comments sought on new build: A CNC Router for RC Gliders and Planes

[njhussey]

Cheers Si, I'll put them in the lathe and take some emery paper to them to get them to fit.

Fitted the 2 solar panels to the shed roof and wired them in series into the charge controller and wired the 2 x 115Ah leisure batteries again in series into the controller and.........it works!! Have a small 600W inverter coming next week so should be able to run small things like soldering irons, radios etc. until I decide what my power requirements are.

Installation has loose wires all over the place as I was running out of time this evening but I wanted to prove it all worked. Shed desperately needs tidying as I've been bringing stuff back from storage and just dumping it in there.