Threaded View
-
17-12-2014 #9
Last Activity: 03-01-2025
Well I dusted off the frame this afternoon and took the last of the epoxy off. It's actually set really hard so I could have used it after all....but better safe than sorry I'm going to re - do it from scratch. 10 mins with a hammer and chisel (screwdriver) and and angle grinder with flapper disc and it's back to bare metal. Going to cut mdf sides this time and seal the gaps/edges/joins with silicone sealant. Got to do a bit more proper work now this afternoon on the lathe but hope to get the moat done tomorrow.
Video showing the hardness of the set Epoxy...
Last edited by njhussey; 18-12-2014 at 06:01 PM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 96 users browsing this thread. (0 members and 96 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM -
CNC construction TUNISIA give your comments
By ali hedi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 06-07-2011, 11:58 PM
Bookmarks