Comments sought on new build: A CNC Router for RC Gliders and Planes

[njhussey]

Yes indicating along the front of the top piece of Ali. Checked it with a straight edge, feeler and light first. Will indicate off the second rail once the gantry is together.

The Ali top, bottom and front pieces were CNC machined to size in one go (I sent them out to someone with a bigger table than me....cheating I know but more accurate than making a jig and moving the plate along to machine a bit at a time ) and clamped together (not the front plate) so I'm hoping that once it's put together it won't need too much tweaking to get them parallel (ish)

[njhussey]

Did a bit of painting this afternoon for an hour....