Comments sought on new build: A CNC Router for RC Gliders and Planes

[njhussey]

Running out of room!!!!!!!!!!!

Just managed to squeeze in a timer relay for cutting the power to the spindle (after the stop signal has been sent to the VFD!!) in the case if an E-stop.

Hope there's nothing else I need to fit in!!!

[njhussey]

It's alive...............:toot : well the Z axis anyway!!

Jogged it up and down and it moves, need to do the autotuning thingamy bob on the AM882 drivers for the current but it's working.....only took 5 bloody years

[Clive S]

Well done Neal it's always nice when it moves the first time.