Comments sought on new build: A CNC Router for RC Gliders and Planes

**Clive S** · 21-07-2015

I like the idea of keeping the water cooling on the Z axis, might look at small PC radiators and fans....

Something like this

http://www.aliexpress.com/item/SP-12...043171101.html

**njhussey** · 21-07-2015

Originally Posted by Clive S

Something like this

http://www.aliexpress.com/item/SP-12...043171101.html

That's the badger Clive!!....

I'm torn between mounting it on the Z axis or on the enclosure frame. I'm sure that the small volume will be OK but I'm erring on the side of caution and thinking of mounting it on the frame, that way there is a bit more water in the system. I've got a 240V small 200 l/hr pond pump, but it's a submersible one so I might just go with that in a bucket with a lid for the time being and then adapt the water circuit later....decisions decisions!

**Washout** · 22-07-2015

Hi Neil,

Good progress recently....

If you want to go down the PC rad and pump route let me know, as I may have a spare 120mm rad (possibly 2), fans and possibly a pump/res unit I can let you have, as I've recently upgraded to 240/280/360/420mm in most of my watercooled PCs.

Chris

**njhussey** · 23-07-2015

Originally Posted by Washout

Hi Neil,

Good progress recently....

If you want to go down the PC rad and pump route let me know, as I may have a spare 120mm rad (possibly 2), fans and possibly a pump/res unit I can let you have, as I've recently upgraded to 240/280/360/420mm in most of my watercooled PCs.

Chris

Cheers Chris, that will be great...pm sent!