Comments sought on new build: A CNC Router for RC Gliders and Planes

[Washout]

Chris, what tape do you use to hold stuff down?

Hi Neil,

Sorry - missed the question at the bottom - I use this tape:

Silverline 198134 Fixman Double-Sided Tape, 50 mm x 33 m from Amazon


http://www.amazon.co.uk/dp/B00F80K5OS

Cheers


Chris

[njhussey]

Hi Neil,

Sorry - missed the question at the bottom - I use this tape:

Silverline 198134 Fixman Double-Sided Tape, 50 mm x 33 m from Amazon


http://www.amazon.co.uk/dp/B00F80K5OS

Cheers


Chris

Cheers Chris, I'll look at getting some...would have made machining this much easier!

[njhussey]

Here's the bracket after I've made a mess with the Durafix, machined 5mm off the tubes (lathe) and bolted it to the firewall....only got 2 bolts in at the moment but WILL have all 4 in before anything electrical gets connected I promise!!!



Put the nose cone on and fitted the prop (18" diameter x 8" pitch) to see what it was like...