Hybrid View
-
26-09-2016 #1
Ok so I've dome the homing switches and all work. Quick vid showing this.
Seems to work ok.....however I've had to reverse the Z axis to get it to home and now its all to cock....if I try to do a tool zero with my touch plate then it goes up instead of down....just looking at the settings in Mach3 to see what I need to reverse/do but if one of you experts could point me in the right direction id be eternally grateful
Sent from my HUAWEI VNS-L31 using TapatalkLast edited by njhussey; 26-09-2016 at 05:32 PM.
Thread Information
Users Browsing this Thread
There are currently 20 users browsing this thread. (0 members and 20 guests)
Similar Threads
-
Does anyone want to build me a cnc router?
By totally useless in forum Open Source Designs & PlansReplies: 25Last Post: 05-05-2014, 12:44 AM -
My new, and first build....comments greatfully received
By berk in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 12-01-2014, 03:15 PM -
BUILD LOG: CNC Router New Build
By PilotTom in forum DIY Router Build LogsReplies: 12Last Post: 25-05-2013, 03:49 PM -
BUILD LOG: A3 Router Build
By GTJim in forum DIY Router Build LogsReplies: 6Last Post: 17-02-2012, 12:53 PM -
CNC construction TUNISIA give your comments
By ali hedi in forum Gantry/Router Machines & BuildingReplies: 5Last Post: 06-07-2011, 11:58 PM
Bookmarks