Quote Originally Posted by 2e0poz View Post
. The cost of the time (which is the most precious cost) is what hurts most.
Look at the bigger picture, look at what you have learnt this time, next time you should not do it wrong.

On another note I built a z axis a few weeks ago, after reading through all the different information on here and other forums I decided on 20mm x 340mm profiled rails fixed to back plate and carriages moving, just got it all powered up and I don't see any deflection/movement whatsoever, I am getting a perfect cut finish and this is on alley.
The rails and carriages were bought off e-bay as used and have no problems with them.

Phill