Mach3 4 axis Hot wire screen set

[allen_g30]

hello gentlemen.
starting from the screen is Sam, I made some changes. Normally, with the consent of Sam.
I will keep you and other changes. I hope it will be helpful.
with friendship,
Allen

https://www.dropbox.com/s/drpzhgvb4a...20CNC.rar?dl=0

[mbj2601]

Hi Allen

Your screenshots look really nice, but it seems that the link to your dropbox are no longer working. Is it possible to post a new link, so that we can enjoy your work?

Best,
Mads

[n0kjf]

as Mads said the dropbox link is broken, any chance of obtaining an update?

[sigmatero]

Anyone happen to have this screenset that they could post somewhere? Looks handy.

[allen_g30]

https://www.dropbox.com/s/wkomzg0dtt...h%203.rar?dl=0

[Boonie]

Hi Allen,
I'm a newbie, great work on the screen. I would be interested in getting your setup profile xml file & screen set.
The dropbox link invalid, or anyone who have the screen set can share?
Kind regards,
Boonie

[Boyan Silyavski]

Just FYI at devcad.com is the best software for foam cutting i know of. I personally use DevFoam and i greatly encourage you to obtain it. Beats hands down any Mach3 screen. And with CNC foam you can control directly the machine

[Boonie]

Hi Boyan,
Thanks for the info, I agree Devcad is best software for foam cutting.
The reason I'm using Mach 3 because I can use the Mach 3 with my router as well.
Those dedicated software for foam cutting either Devcad or GMFC are better for foam but each of them require new USB controller + software all add up quite expensive for beginner.
Kind regards,
Boonie

[Boyan Silyavski]

I use devfoam to program the cut. As there i choose where the exact cut on the letter will be. And send it then to my controller in G code.

Basically i have an bolt on attachment to my Z that permits me to cut a whole sheet of 600x1300mm. Unfortunately Horizontally.And i have to stay there and pin the letters with needles so they dont fall and mess up. But does the job and i make money from it. Believe it or not , already an year i dont have the time to put together my big foam cutter that is supposed to use a dedicated controller for foam cutting, arduino.

[onthemarc]

Just FYI at devcad.com is the best software for foam cutting i know of. I personally use DevFoam and i greatly encourage you to obtain it. Beats hands down any Mach3 screen. And with CNC foam you can control directly the machine

Hi Boyan
(Is CNC foam) the controller you are using with Devfoam. I can't find a controller like that on Google. Do you make most of your money cutting foam by making signs or what else is your best revenue source? Do you cut foam full or part time? Can you show a pic of your foam cutter?