Thread: Mach3 4 axis Hot wire screen set
Hybrid View
-
27-08-2010 #1
Yes Profili Pro will output Gcode that will run in Mach3. If fact the screen shot was taken while running Gcode produced from Profili Pro.
As for washout in profili you can input the amount of washout and profili will adjust the tip of the wing to add the washout.
Hi Vic66,
Good point about tapered wings, but can the wire manage washout? Not having used foam cutters I'm trying to picture in my head how the wire would move to do that - being pulled taut limits the possibilities I think, unless you overcut into the waste using multiple passes?
For those that don't know washout is a deliberate twist (to a lower angle of attack) as the wing goes from the root (near fuselage) to the tip. This helps reduce tip stall at lower speeds on tapered wings, for a compromise at high speeds.Last edited by sharbold; 27-08-2010 at 12:39 AM.
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
Z AXIS, big tex blue screen and auto tool sensor Problems
By Tomnewry in forum Artsoft Mach (3 & 4)Replies: 11Last Post: 01-01-2014, 09:01 PM -
eBay: Nice CNC USB Pendant with Touch Screen 2.8 for Mach3
By Ricardoco in forum Items On eBay UKReplies: 6Last Post: 26-03-2013, 12:16 PM -
New Screen Set for Mach3
By Mike F in forum Artsoft Mach (3 & 4)Replies: 2Last Post: 10-01-2011, 10:55 PM -
Touch Screen and Mach3
By GeoffV in forum Artsoft Mach (3 & 4)Replies: 6Last Post: 03-10-2010, 07:50 PM -
4 Axis Screen Set - Mach3
By George_Race in forum Artsoft Mach (3 & 4)Replies: 0Last Post: 13-07-2010, 07:48 PM
Bookmarks