Quote Originally Posted by routercnc View Post
]
Interesting idea, but it's got me a bit puzzled. If the thread rotates, and the bearing rotates with it, how does it progress along the thread?
Er...it just does!
The bearing is rolling on the thread properly, not vibrating. It's difficult to explain and visualise. Try just getting a random bearing and screw and fiddle with it, you'll soon see how it works!
If you imagine the inner ring of the bearing was stationary then clearly it would still work...just like a normal nut. The inner ring rotating makes no difference to this, except of course giving rolling friction.

Sorry I can't really explain it any better!

One slight issue I can see with this is the bearing applies torque to the screw, trying to bend it. This could be solved with having two bearings angled opposite to each other but I think M16 is strong enough for this not to be an issue.

I'm in the workshop at the moment..lots of tapping, joy!