Quote Originally Posted by John S View Post
You can model and create a dxf then bring that into Cut2D or do as i did, define a shape, in my case I guessed 250mm x 250mm x 6mm thick.
then chose Arial text 70mm high , did the ABC bit. Then swapped from CAD to CAM and chose a tool and depth, calculate and job done.

No the eval download will only create code for the samples with the program, loco wheel, con rod and the badge that's there.

.
You make it all sound so easy John, pity the eval won't do my one off. OK, it's in the mix, when I get the sizes and details etc i'll draft them up as a dxf and work it from there.