Hybrid View
-
14-09-2010 #1
Last Activity: 4 Weeks Ago
Hi Steve,
Here's a sketch I was working on a while ago. Double X axis motors, all ballscrews, profile rail Y and Z, supported rail X. Gantry sides are RHS with spacer block connection to gantry. Y axis ballscrew is underneath to give a low bending moment on the gantry sides. Disadvantage is risk of collision damage and swarf ingress (needs shield).
Maybe some ideas in there.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Ross77's Z Axis Design
By Jonathan in forum Open Source Designs & PlansReplies: 1Last Post: 20-05-2013, 06:09 PM -
Critique required on y-axis design.
By Spedley in forum Gantry/Router Machines & BuildingReplies: 2Last Post: 06-05-2013, 09:17 PM -
Z-Axis design and advice
By Mad Professor in forum Gantry/Router Machines & BuildingReplies: 22Last Post: 06-04-2013, 11:00 AM -
Design help etc required with DIY CNC Router Design / Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 21-10-2011, 04:50 PM -
Y axis design
By GeorgeD in forum Gantry/Router Machines & BuildingReplies: 9Last Post: 15-07-2010, 03:04 AM
Bookmarks