. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Hello all. I am an engineer living in the wilds of Nottinghamshire. My day job is designing bits for gas turbines. Of an evening (when wife and offspring allow!) I like to achieve not a lot in my shed (the garage) at the bottom of the garden. In there I have a couple of lathes a manual mill, shaper, drills grinders and all the other dross attached to making things. I am nearing completion of a CNCd Centec mill amoungst other things.

    Hopefully post some pics when I work out how.

  2. Hi Andrew and welcome to the site. Sounds like you have a bit more room in your garage than I do in mine! I almost bought Centec but didnt really have the room for it...

  3. #3
    Welcome Andrew, I have a shed like that !!
    John S -

  4. #4
    Sounds like an equiped shed is standard kit in Notts

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Best type of shed.
    By Philly in forum General Discussion
    Replies: 14
    Last Post: 03-11-2018, 08:17 PM
  2. Community Shed
    By Musht in forum General Discussion
    Replies: 12
    Last Post: 06-10-2013, 12:15 PM
  3. NEW MEMBER: Hi from Worksop in Nottinghamshire
    By Waylander2 in forum New Member Introductions
    Replies: 3
    Last Post: 01-11-2010, 11:11 PM
  4. Nottinghamshire Machining services for one-offs and prototype work
    By jpcnc in forum Opportunities Available & Sought
    Replies: 2
    Last Post: 25-07-2010, 09:57 PM
  5. NEW MEMBER: Hiya from Nottinghamshire
    By jpcnc in forum New Member Introductions
    Replies: 8
    Last Post: 22-07-2010, 09:39 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •