Thread: CNC Design and advice
Threaded View
-
17-09-2010 #1
Good day all.
Due to lack of funds, I have decided to look at making my own smallish cnc unit mainly from MDF, unto such point that I can afford otherwise.
The unit is going to be mainly used for milling and drilling PCB boards, but I would also be using it for Acrylic, and maybe small alu jobs.
I already have 4x Astrosyn MY103H702 stepper motors, 1x 4 Axis TB6560 stepper motor driver board, 1x 24volt 12amp switch mode power supply.
I have been trying to come up with a design using solidworks, and here is the current design.
I have only been using solidworks for just over a week now, so please bear with me.
The design is by no means finished, and is subject to change depending on what feedback I get.
When I 1st started designing this unit, it was meant to be quite small, but the more I design the bigger it has got.
Any advice you can give me to help finalize the design would be grate.
Thanks for your time.
Best Regards."If first you don't succeed, redefine success"
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Interesting Papers on heavy duty design, vibrations, composites and column design
By D.C. in forum Gantry/Router Machines & BuildingReplies: 15Last Post: 25-06-2016, 10:13 PM -
Z-Axis design and advice
By Mad Professor in forum Gantry/Router Machines & BuildingReplies: 22Last Post: 06-04-2013, 11:00 AM -
Gantry design advice please
By D-man in forum Gantry/Router Machines & BuildingReplies: 10Last Post: 07-11-2012, 04:17 PM -
Advice needed for Z Design
By Hobgoblin in forum Linear & Rotary MotionReplies: 8Last Post: 10-09-2012, 09:18 PM -
Design help etc required with DIY CNC Router Design / Build
By MikeyC38 in forum Gantry/Router Machines & BuildingReplies: 12Last Post: 21-10-2011, 04:50 PM
Bookmarks