. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 17-09-2010 #4
    blackburn mark's Avatar
    Lives in blackburn, United Kingdom.
    blackburn mark
    Last Activity: 24-03-2022 Has been a member for 9-10 years. Has a total post count of 604. Received thanks 28 times, giving thanks to others 28 times.
    looks a bit tall and flimsy on the gantry sides... if your making a moving bed you can afford to beef up those gantry sides
    also id be tempted to look at puting the spindle over the centre of the X axis so the bed is only needing to travel half its own lenght either way (if that makes any sense) besides that it looks like a classic design and that seems to be the way to make a winner
    Last edited by blackburn mark; 17-09-2010 at 02:14 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Interesting Papers on heavy duty design, vibrations, composites and column design
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 15
    Last Post: 25-06-2016, 10:13 PM
  2. Z-Axis design and advice
    By Mad Professor in forum Gantry/Router Machines & Building
    Replies: 22
    Last Post: 06-04-2013, 11:00 AM
  3. Gantry design advice please
    By D-man in forum Gantry/Router Machines & Building
    Replies: 10
    Last Post: 07-11-2012, 04:17 PM
  4. Advice needed for Z Design
    By Hobgoblin in forum Linear & Rotary Motion
    Replies: 8
    Last Post: 10-09-2012, 09:18 PM
  5. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules