. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 17-09-2010 #1
    Mad Professor's Avatar
    Lives in Isle Of Wight, United Kingdom.
    Mad Professor
    Last Activity: 27-12-2024 Has been a member for 9-10 years. Has a total post count of 254. Received thanks 10 times, giving thanks to others 1 times.
    Jonathan: thank you for the stepper motor files, I will use that to update my next rev of the design.

    As I am going to be using the TB6560 stepper motor driver board, <30volts is a must otherwise you end up smoking the board and or chips, so I have settled for 24volts.

    Speed would be nice, but for now just a working unit will be grate.

    If can afford it I will be using balls screws and nuts from Gary, but otherwise it would have to be threaded bar M10 or M12.

    There is an error with the Z-Axis in that 1st design, The Z-Axis is meant to be 300mm with 150mm of travel.

    Here is the updated version (Rev1.1)
    Last edited by Mad Professor; 17-09-2010 at 08:10 PM.
    "If first you don't succeed, redefine success"
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Interesting Papers on heavy duty design, vibrations, composites and column design
    By D.C. in forum Gantry/Router Machines & Building
    Replies: 15
    Last Post: 25-06-2016, 10:13 PM
  2. Z-Axis design and advice
    By Mad Professor in forum Gantry/Router Machines & Building
    Replies: 22
    Last Post: 06-04-2013, 11:00 AM
  3. Gantry design advice please
    By D-man in forum Gantry/Router Machines & Building
    Replies: 10
    Last Post: 07-11-2012, 04:17 PM
  4. Advice needed for Z Design
    By Hobgoblin in forum Linear & Rotary Motion
    Replies: 8
    Last Post: 10-09-2012, 09:18 PM
  5. Design help etc required with DIY CNC Router Design / Build
    By MikeyC38 in forum Gantry/Router Machines & Building
    Replies: 12
    Last Post: 21-10-2011, 04:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules