Quote Originally Posted by williamturner1 View Post
I got quotes (Brammer) 12mm bore x32x10 £28 but I would need 6 (xAxis=2x2 + zAxis=2)
which is before the other parts
£28 for 1 x 7201 bearing...!!

I should try looking elsewhere, should be paying no more than £2.50-£7.00 each depending where you get them from and the quality you are after. You will not need anything that's high quality as the speed that it will be working at and the forces involved will both be quite low compared to what the bearing specs are.

If ringing round then ask for the Chinese bearing prices, they should be more than good enough for what you will be using them for.

And there is always fleabay.... http://cgi.ebay.co.uk/7201-SINGLE-RO...item2eab04d5bb