Thread: Boxford 190vmc upgrade
Threaded View
-
27-10-2015 #31
Has Dave says will be for spindle feed back and the colours will probably be something like this but they could be anything has well.
Red = 5v (For LED)
Grn = 0v(gnd)
Yel = Signal +
blu = Signal -
If it's like most of these Slotted Optical sensors fitted on these machines there will be 2 slotted sensors, one for RPM signal and one for Index signal wired together each with 4 pins. Model number will be something like 306-061
pin1 = Signal +
pin2 = signal -
Pin3 = Led -
Pin4 = Led +
Like Dave said you really need the switch model number.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WANTED: Boxford 190VMC toolholders, tool changer and manuals
By davethesteam in forum Items WantedReplies: 5Last Post: 06-11-2017, 11:29 AM -
Kress Spindle upgrade to a 2kw
By Metal pecker in forum Kress Milling MotorsReplies: 4Last Post: 05-05-2014, 12:22 PM -
Upgrade
By Dopy in forum General DiscussionReplies: 0Last Post: 09-11-2011, 01:57 AM -
BUILD LOG: Time for mk2 upgrade!
By routercnc in forum DIY Router Build LogsReplies: 16Last Post: 26-02-2011, 11:38 PM
Bookmarks