. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-11-2015 #31
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by swood1 View Post
    Hi Jazz,

    I have it setup basically as originally proposed (ie. Wiring into the green board, where Agnd on 107 goes to 0v, and Aout to 10V), I shall get some pics showing my wiring when I get some time. The spindle works well with Mach3 currently including slow/fast and I can adjust the ramp up etc. Just cant get it to go backwards at the moment.
    That is just the Speed control of the motor. The Reversing will be done by relays or Contactors that switch the Polarity of the Motor. You control these Contactors using the Relay OUTPUT's on the 107 board. Then in Mach3 you setup which OUTPUT/Relay controls Forward or Reverse.

    The time Delay you setup is how long Mach waits before turning that OUTPUT/Relay On/off.
    Last edited by JAZZCNC; 10-11-2015 at 04:52 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 16 users browsing this thread. (0 members and 16 guests)

Similar Threads

  1. WANTED: Boxford 190VMC toolholders, tool changer and manuals
    By davethesteam in forum Items Wanted
    Replies: 5
    Last Post: 06-11-2017, 11:29 AM
  2. Kress Spindle upgrade to a 2kw
    By Metal pecker in forum Kress Milling Motors
    Replies: 4
    Last Post: 05-05-2014, 12:22 PM
  3. Upgrade
    By Dopy in forum General Discussion
    Replies: 0
    Last Post: 09-11-2011, 01:57 AM
  4. BUILD LOG: Time for mk2 upgrade!
    By routercnc in forum DIY Router Build Logs
    Replies: 16
    Last Post: 26-02-2011, 11:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules