Thread: Hi from Swindon!
-
29-08-2008 #1
Hi all, thanks for the invite to join forum!
I did an apprenticeship in tool jig and die making a few years ago prior to moving to England and my experience with machining is all manual, based on vertical and horizontal machines along with a few other things such as surface grinding, horizontal shapers and radial arm drilling machines. I'm currently working as a maintenance technician (mechanical) on an automated distribution system and thought I'd make use of my experience and give CNC a go at home!
I'm in the process of cnc'ing a sieg x1 micro mill with a kit from motion control products and so far I'm making fairly good progress. I look forward to chatting with other members and sharing info!
The forum looks good, best of luck going forward!
Peteski...
-
29-08-2008 #2
Hi Peteski,
Nice to see another member.
There is a lot of good information here and a friendly bunch of people.
GaryVisit Us: www.automationshop.co.uk
-
29-08-2008 #3
Hi welcome to the forums, and thanks for the kind words i look forward to viewing your progress with the conversion.
-
31-08-2008 #4
Hi Peteski!
Welcome to the forum. I'm 90% of my way through building my CNC Router. Friendly bunch of pepole here and lots of good advice.Nothing is foolproof......to a sufficiently talented fool!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Hi from swindon
By Swarfing in forum New Member IntroductionsReplies: 4Last Post: 29-08-2009, 08:17 AM
Bookmarks