-
14-10-2010 #1
Hi Guys, I have been really struggling for time to get my machine finished as work is a bit manic at the moment.
I need somone to finish my conversion, so far I have the machine setup and working with mach3, x and z axis's work fine, spindle works but not sure the encoder is working 100% as it displays the speed then goes 0 then displays the speed...
The tool turret works but it spins to fast for the software to react quickly resulting in tool changes taking upto 10 minutes. Either the inverter/motor needs sorting to run slower or a stepper motor needs fitting and setting up.
Home and limit switches are connected to a second parallel port but need final setting up in Mach3.
Coolant system needs connecting to 1 of the spare relays and setup with Mach3.
Final testing of the machine and test cuts to be performed.
Full original schematic availible.
Thanks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CONVERSION: Denford Triac Mach3 conversion
By rnr107 in forum Conversion Build LogsReplies: 11Last Post: 23-10-2014, 02:44 PM -
FOR SALE: Denford MIRAC CNC Lathe. Single Phase. Absolutely complete and perfect running order.
By Nick Butler in forum Items For SaleReplies: 19Last Post: 21-08-2013, 11:20 PM -
FOR SALE: Denford Starmill coverted to Mach3
By Kai in forum Items For SaleReplies: 0Last Post: 02-06-2011, 12:30 PM -
FOR SALE: Denford Mirac CNC Lathe with Auto Tool Changer For Sale
By CHudson in forum Items For SaleReplies: 3Last Post: 19-02-2011, 12:11 AM -
Denford Mirac Electronics Refurbishment
By CHudson in forum Computer SoftwareReplies: 11Last Post: 17-06-2010, 08:30 PM
Bookmarks