-
13-11-2010 #1
Hi, this will be my first build so i have decided to go with the following-
http://buildyourcnc.com/cnckitintro.aspx
I have already bought the plans, just in the middle of converting everything to metric. I will be mainly cutting MDF, soft wood and some hard woods. For the electronic side of things i have seen this kit-
http://buildyourcnc.com/electronicscombo.aspx.
But i understand from reading on this site that it is preferable to use separate boards in case things go pop. Is there a cheaper alternative for a complete novice to useLast edited by irving2008; 14-11-2010 at 11:24 AM. Reason: corrected link
-
14-11-2010 #2
Your electronics kit link is wrong...
-
14-11-2010 #3
You might have a look at www.diycnc.co.uk for an alternate electronics configuration
-
14-11-2010 #4
Sorry about that the link should be
http://www.diycnc.co.uk/html/cnc_systems.html
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Im new, am a 3D designer. Need a New cnc machine and need advice and guidance
By FlyHighRC in forum New Member IntroductionsReplies: 134Last Post: 10-06-2014, 12:28 AM -
Control Panel Guidance
By GTJim in forum General ElectronicsReplies: 2Last Post: 03-09-2013, 08:42 PM -
Or Guidance ;) Connection Name(s)
By Carlb1058 in forum Marketplace DiscussionReplies: 6Last Post: 13-07-2013, 12:48 AM -
NEW MEMBER: Old guys who need guidance
By silvasurf in forum New Member IntroductionsReplies: 1Last Post: 25-02-2013, 09:12 PM -
Guidance please ...
By Wobblybootie in forum General ElectronicsReplies: 4Last Post: 13-11-2010, 01:30 PM
Bookmarks