Threaded View
-
26-11-2010 #1
Hello Folks,
I've been lurking on this and other CNC forums for a while, thought it was about time I 'showed my face'. I've begun building my own CNC router, I also want to try a bit of REPRAP printing with it also.
I started to build a skate bearing / Ali angle design, but wasn't entirely happy so abandoned it. I've never been able to simply follow instructions, and am always looking to build a better mouse trap.
My new machine is being built on a shoestring, so utilising what I have to hand I've come up with my own design of bearing which looks promising. This should hopefully provide more rigidity and a more compact design while still keeping costs as low as possible.
I'm keeping a build log at my site:- http://www.chickfamily.net
I'd love to hear any comments suggestions or advice on the design.
Many Thanks in advance
Peter
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: new build, new member :)(
By Want2build1 in forum New Member IntroductionsReplies: 0Last Post: 23-10-2013, 10:28 PM -
NEW MEMBER: Hello all, finally ready to start a build log.
By Iwant1 in forum New Member IntroductionsReplies: 11Last Post: 25-12-2012, 06:03 PM -
NEW MEMBER: Hi From Oxfordshire - with Roland CAMM3 machine
By rowifi in forum New Member IntroductionsReplies: 1Last Post: 15-02-2011, 05:04 AM -
NEW MEMBER: Started building!
By bobgrant in forum New Member IntroductionsReplies: 1Last Post: 02-09-2010, 09:42 AM -
NEW MEMBER: Hi From Oxfordshire
By Vic66 in forum New Member IntroductionsReplies: 4Last Post: 11-11-2009, 02:27 AM
Bookmarks