Thread: Z axis
-
02-12-2010 #1
Hello ALL
I’m building my own CNC router, I’ve also refitted a Denford Orca lathe and a Denford mill with new Boards from routout cnc 10amp one to run with mach3 the Lathe is up and running so is the mill
the problem is the router as I said before it is out of 50mm box section with 25mm profile rails on the Y-axis and Z axis from EBay stepper motor from Zapp all run by belts sorry can’t post pictures at the moment lost all when pc crashed at the moment the X Axis is running on Ali angle left over from the MDF one the Question is dose Mach 3 run the Z axis slower as I can’t get the motor speed up as fast as the X & Y axis’s
Looking for some help
Many Many Thanks in advance
The Phoenix
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
5-axis Breakout Includes Hand-Held Control Port & 3,4,5-axis Postion-Display Port
By LoveLearn in forum General ElectronicsReplies: 12Last Post: 25-05-2013, 12:41 AM -
RFQ: Z axis and y axis carriage
By D-man in forum Projects, Jobs & RequestsReplies: 0Last Post: 08-04-2013, 10:06 AM -
NEW MEMBER: Goal - Enable 3-Axis CNC Bed Mill to Perform 5-Axis Milling
By LoveLearn in forum New Member IntroductionsReplies: 2Last Post: 25-01-2012, 08:46 PM -
Y axis is making X axis stall...!!
By fasteddy in forum Machine DiscussionReplies: 83Last Post: 24-10-2011, 12:19 PM -
Precision metal processing (3 axis, 5 axis, 7 axis) OEM
By 7AxisCNC in forum Manufacturer NewsReplies: 0Last Post: 17-05-2011, 02:04 PM
Bookmarks