Quote Originally Posted by bruce_miranda View Post
I was a bit too over confident and set-up everything into the box. If with the new BOB things don't start to work well then I'll have no other option but to start again.
Gary has already suggested its an issue with low power laptops didnt he?

Quote Originally Posted by Gary View Post
I just had an email from Bruce, and it apears that his clock pulse is about 3.3V, and he is using a laptop.

This is most definately the problems, and is actually quite common when a laptop is used.

The solution would be to use either another laptop with higher voltage outputs, or a desktop PC with a parallel port.

Bruce,

Try this and give us your results.
Thanks
Gary