Threaded View
-
17-09-2008 #26
Have a look in your BIOS for SpeedStep if it is an Intel CPU, that is what is causing the interupt most likely. If you can disable it then do so but be aware that your CPU might default to the lowest speed (mine dropped to 1.2Ghz from 2.4) once you boot back into windows.
Can you go with a desktop Bruce or are you stuck with the laptop like me?
I have to use one because a desktop would be dead in a week or so in the damp atmosphere we live in, at least I can bring the laptop and control enclosure indoors after using my machine.
Hope you get it sorted soon.Nothing is foolproof......to a sufficiently talented fool!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Use of microstepping, external motion control boards, and related issues
By Neale in forum General ElectronicsReplies: 0Last Post: 11-06-2014, 12:17 PM -
Leadshine 4-axis motor motion control cards? Any experience and info?
By Boyan Silyavski in forum Motor Drivers & ControllersReplies: 0Last Post: 02-12-2013, 06:43 PM -
CNC Motion control
By StoneyCNC in forum Manufacturer NewsReplies: 1Last Post: 26-08-2013, 10:07 AM -
2x Motors, 2x drivers. How about breakout?
By Tenson in forum Motor Drivers & ControllersReplies: 2Last Post: 20-09-2012, 03:21 PM -
Time for a purpose built motion control computer.
By GeoffV in forum General ComputingReplies: 17Last Post: 08-11-2010, 01:11 AM




Reply With Quote

Bookmarks