Super X1 conversion - CNC Fusion kit

[bruce_miranda]

Just rebuilt another laptop with Win XP SP3. this one has an inbuilt parallel port and the Driver Test now gives me a nice almost distrubance free line. Today I'll try moving the X axis but am really keen to see what settings you are using. Can you please confirm what all you are using in your conversion.

Mine is a Super X1 (short X table). CNC fusion kit, 1.8Nm Motors and MSD542 from MCP.
Power Supply is a 40V 10A one and I'm using a Dell D800 laptop.

[Peteski]

I'm using the same motors, 28081b's I think. Same drivers. At the moment , running in mach 3 motor config at 1000 step per for the x and y axis at 600mm/min and acc of 200. The microstep timing is 2us for all motors. The other settings on the dip switches, I can't recall off-hand, but I'll let you know tonight when I get home.