. .
Page 2 of 2 FirstFirst 12
  1. #11
    More than welcome. Good to hear you're making progress.

    Could the stalling issue be caused by tight gibbs on your slides?!! Mine gave me grief until I removed and honed the high spots off of them and threw a healthy dose of 15wt motorcycle fork oil at them.

  2. #12
    They seem to stalling at all speeds and even without any load connected i.e. motors not connected to machine. Also it happens only when I continously jog from one end to another.

  3. #13
    Just found this site: http://www.superx3.com

    Its a Sieg and Super X3 Enthusiasts Site !

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FOR SALE: SEIG SX2 CNC Fusion Conversion for sale. Seoul/UK
    By grunt-will in forum Items For Sale
    Replies: 8
    Last Post: 14-07-2014, 08:30 PM
  2. Mazatrol fusion 640M pc software
    By hoezap in forum Mazak, Yamazaki Machines
    Replies: 2
    Last Post: 19-05-2013, 09:59 PM
  3. CONVERSION: Sieg Super X3 conversion
    By Sooty in forum Conversion Build Logs
    Replies: 0
    Last Post: 06-03-2013, 02:29 PM
  4. CNC Fusion Kit for Warco mini mill / Amadeal XJ12-300
    By rnr107 in forum Gantry/Router Machines & Building
    Replies: 2
    Last Post: 03-07-2012, 01:18 PM
  5. Super X1 conversion - Lead Screw Pitch?
    By bruce_miranda in forum Lead Screws, Nuts & Supports
    Replies: 2
    Last Post: 19-09-2008, 01:29 PM

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts