Thread: X and Y axis stalling
Hybrid View
-
20-12-2010 #1
Last Activity: 02-02-2011
Not sure what you are getting at.
This is an image of the dash board. Controls on the left are for the router and on the right for the axis.
-
20-12-2010 #2
Last Activity: 11-01-2024
There are people who read this forum with a lot of experience (I'm not one of them) and they may recognise the bit of kit and be able to suggest some tests. Looking at the picture of the board it would seem to be a fairly easy job to replace the driver ICs which would be much cheaper than getting a new board but you'd need to do more tests before knowing whether that would be a solution.
Originally Posted by francooz
-
20-12-2010 #3
Last Activity: 17-04-2012
Well if its an electronics problem then i will be no help whatsoever
Phil
-
The Following User Says Thank You to M250cnc For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Y axis stalling
By richie00boy in forum Machine DiscussionReplies: 38Last Post: 11-09-2013, 10:37 AM -
rough traversing and stalling only in main screen
By davethefixer in forum Machine DiscussionReplies: 4Last Post: 12-05-2013, 08:34 AM -
DPC spikes stalling stepper motors
By Mad Professor in forum Stepper & Servo MotorsReplies: 2Last Post: 23-10-2011, 10:21 AM -
Clicking sound from stepper motor & stalling
By francooz in forum Stepper & Servo MotorsReplies: 2Last Post: 06-02-2011, 04:15 PM -
Missing Steps + Stalling X-axis
By danielbriggs in forum Linear & Rotary MotionReplies: 5Last Post: 02-09-2010, 02:59 PM
Bookmarks