. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 13-01-2011 #11
    h4ppy-chris's Avatar
    Lives in burnley, United Kingdom.
    h4ppy-chris
    Last Activity: 17-09-2011 Has been a member for 9-10 years. Has a total post count of 110. Received thanks 3 times, giving thanks to others 11 times.
    how did i set it to 16 microsteps? is that the 1/16 setting on the board, and i need to change it to 1/8?
    i have set the dips to the 1/8 setting at the mo.

    this is from the post on these boards
    "The 1/8 step was reversed with 1/16, a fairly minor problem but still irritating as I had a scaling error on movement until I figured it out."

    by the way a BIG thanks to all that have helped me so far.
    Last edited by h4ppy-chris; 13-01-2011 at 01:31 PM.
    there is no such thing as a stupid question, just stupid answers !!!!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Well here we go again, start another build
    By D-man in forum Gantry/Router Machines & Building
    Replies: 5
    Last Post: 22-01-2014, 09:59 AM
  2. Build log when to start posting on this site
    By ramsbury in forum General Discussion
    Replies: 6
    Last Post: 15-01-2014, 10:43 AM
  3. NEW MEMBER: Hello all, finally ready to start a build log.
    By Iwant1 in forum New Member Introductions
    Replies: 11
    Last Post: 25-12-2012, 06:03 PM
  4. A few questions before I start my build
    By eclassic in forum General Discussion
    Replies: 0
    Last Post: 11-07-2011, 10:54 PM
  5. NEW MEMBER: Were do I start?!
    By tonygagey in forum New Member Introductions
    Replies: 4
    Last Post: 07-08-2010, 07:55 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules