. .
  1. #1
    Does anyone know what lead screws are used on the Super X1?
    Are they M12 x 1.75 for the X and Y axis and M10 x 1.5 for the Z? I have a Metric Super X1 but I think all X1s are metric and only the dials are changed to imperial.

  2. #2
    Got a response from arceurotrade.co.uk

    Metric Machine:

    X & Y 12mm x 2.0mm pitch
    Z 10mm x 1.5mm pitch

    Imperial Machine:

    X & Y 12mm x 20 TPI
    Z 10mm x 16 TPI

    This is handy if you want to know how to tuning your motors. But remember that Imperial Machines use metric screws too!

  3. #3
    Nice one bruce, ill stick this up as a sticky for others to read :)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CONVERSION: Sieg Super X3 conversion
    By Sooty in forum Conversion Build Logs
    Replies: 0
    Last Post: 06-03-2013, 02:29 PM
  2. timing belt instead of lead screw
    By deannos in forum Gantry/Router Machines & Building
    Replies: 28
    Last Post: 06-03-2012, 08:25 AM
  3. one lead screw or two
    By johngoodrich in forum Gantry/Router Machines & Building
    Replies: 10
    Last Post: 13-08-2011, 02:39 PM
  4. x-axis rails and lead screw
    By adambrum in forum Gantry/Router Machines & Building
    Replies: 1
    Last Post: 13-08-2011, 01:56 PM
  5. Super X1 conversion - CNC Fusion kit
    By bruce_miranda in forum Sieg Milling Machines
    Replies: 12
    Last Post: 19-09-2008, 01:43 PM

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts