Thread: Hi from a newbie in Wiltshire
-
08-01-2011 #1
Hi, Used to work in a tool room years ago on an HCT but moved away from engineering things some 20 odd years ago. The Hardinge was so good i could not think of having any other lathe.
Just got an hlv to play with. unfortunately its a 440v 3 phase and i only have 240v single phase uk.
I am looking for a cheap way to get it up and running. I don't want to re-configure any of the internal wiring as i want to eventually restore it and want to keep it in an much of an “as built condition” if possible.
I was thinking about making a rpc with a step up transformer from Airlink, They do a 240v to 415v from stock but i am waiting for a quote on a 240v to 440v custom one, It also seems i need a neutral to run the feed control?
Ii was thinking if i wired the idler motor in a star config this may provide what i am looking for. I already have the idler motor which says its a 2.5Kw 440v to 480v Y. Am I on the right track or am i talking rubbish?
I could do with it running asap as i need to make some bits for a biodiesel processor i am making , I was just going to put the transformer output on the idler motor and connect to the lathe, when i have a bit more time I want to refine the rpc design to get it a bit more balanced, I only need to make a few small items from brass so no big cutting loads, I don’t even need the feed to be working for these bits but if possible it would be nice.
Seems I have rambled on enough for my first post and if anyone is still awake and can offer any input on what I am trying to do it would be appreciated.
Cheers
VinceLast edited by irving2008; 09-01-2011 at 12:48 AM.
-
09-01-2011 #2
Hi Vince and welcome to the site. Never played with an rpc, I'd always go for a VFD, but I'm sure others have done so. We have a couple of Hardinge owners on here...
-
09-01-2011 #3
Hi Vince nice to see another local, as Irving says go wit the VFD. I'm in the middle of wiring up my 3HP 3 phase lathe at the moment myself with one. Don't be afraid to change the wiring either as if you sell the lathe later will probably go to another home user and they will want 240v. Your existing motor will probably be able to be wired to Delta as well.
PaulIf the nagging gets really bad......Get a bigger shed:naughty:
-
09-01-2011 #4
Vice i have a VFD on my lathe but if i had to do it again i would go for an ac servo motor
You will still have speed control but full power from 0 RPM to full speed i know that may be slightly untrue technically
You would also have the ability to do rigid tapping as and when software allows it
Phil
-
09-01-2011 #5
-
09-01-2011 #6
-
09-01-2011 #7
-
09-01-2011 #8
Jonathan i made a valid point of the added benefits of a servo motor namely Zero to full speed with full torque
You came back with a statement that a VFD could do that in delta mode well it can't run that way and a VFD motor combo certainly cant run as a rotary axis
So why did you quote me ?
Take a look at this video http://www.onecnc.net/videos/video_mill_turn.htm
Phil
-
09-01-2011 #9
-
09-01-2011 #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
NEW MEMBER: Not another Newbie!
By LawcockLD in forum New Member IntroductionsReplies: 7Last Post: 07-06-2014, 11:22 PM -
NEW MEMBER: Newbie to CNC
By thuncle in forum New Member IntroductionsReplies: 3Last Post: 12-09-2013, 07:13 PM -
NEW MEMBER: Not another newbie!
By andyl in forum New Member IntroductionsReplies: 5Last Post: 05-02-2013, 09:55 AM -
NEW MEMBER: Newbie
By Dieseldog in forum New Member IntroductionsReplies: 4Last Post: 27-01-2013, 08:39 PM -
NEW MEMBER: Hi from Wiltshire.
By mikec in forum New Member IntroductionsReplies: 6Last Post: 24-06-2009, 05:46 PM
Bookmarks