Some Gcode generating programs

[Jonathan]

Here it is (written in the car on the way back from grandparents, had to wait til now to get internet)... send me the Gcode if you want before running it and I'll check its not done anything too silly. Should be ok though...

PulleyCalc4.zip

I've included an example Gcode file with the numbers you gave. Let me know how it goes.

[blackburn mark]

written in the car on the way back from grandparents

Smart arse !!!!!

nice one jonathan :) ill give it a go and report back as soon as i get the chance :)

[Jonathan]

I couldn't look it up at the time, so left it so you could enter the distance between the pitch diameter and pulley surface. For T5 you want to enter 0.5mm.

(Source: http://www.sdp-si.com/D265/HTML/D265T016.html )