Web Goblin cnc has begun

[Jonathan]

James,
a lathe coolant system will work perfectly well for your spindle.

Yep, but if it was me I'd use it to provide coolant for what I'm cutting on the router as I mainly use the router for aluminium. The annoying bit is how to make a coolant tray which includes a sacrificial bed? I guess I need to find a metal tray with decent height sides and maybe a suitably impervious bed.

Jonathan,
have you wired up a seperate start switch for your vfd such as via a relay or switch rather than using the controls on the front of the vfd?.

I just use the controls on the front.

Have you checked the voltage on the relevant signal terminals?

This is the manual I used, might be different to yours:

http://www.jinlantrade.com/ebay/invertermanual.pdf