Threaded View
-
22-01-2011 #14
I ran it at 3100rpm for 20 mins. The angular contact bearing was very slightly warm - helped no doubt by all the aluminum around it. The stator got a little warmer, still nothing to worry about.
Managed to get 1.5kw out of the motor without it complaining.
I'll have to buy one of these soon to run it at 6200rpm:
http://www.hobbyking.com/hobbyking/s...dProduct=10944
or maybe
http://www.hobbyking.com/hobbyking/s...idProduct=4691
Either way it's a lot of money.Last edited by Jonathan; 22-01-2011 at 04:36 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Diy Brushless Spindle
By blackburn mark in forum Brushless Spindles & MotorsReplies: 181Last Post: 08-06-2021, 03:50 PM -
Spindle motors resonable options
By Web Goblin in forum Spindles & Drive MotorsReplies: 15Last Post: 20-11-2016, 03:31 PM -
DIY Brushless spindle
By booski in forum Brushless Spindles & MotorsReplies: 2Last Post: 30-10-2013, 09:36 AM -
FOR SALE: 400w panasonic ac brushless servo motors and drives
By gavztheouch in forum Items For SaleReplies: 3Last Post: 29-12-2011, 03:04 PM -
FOR SALE: Metabo 710W 230V Electric spindle, stepper motors, Tr nuts 20x4
By Vladimir_MD in forum Items For SaleReplies: 3Last Post: 09-04-2010, 05:24 PM
Bookmarks