Hybrid View
-
20-01-2011 #1
Nice, they look like fun!
.Me
-
20-01-2011 #2
Nice...I once made cylindrical version of that.
How did you hold it in the chuck? Soft jaws machined to fit?
Very effective, though kind of cheating rolling them with one soft surface.
-
20-01-2011 #3
Well i don't know about hours, few minutes maybe. They have been made for someone to use in demonstrations and have some fun.
They are cylindrical, no i didn't use soft jaws and i am rolling them using shiny clear perspex which is nice and hard.
Phil
-
20-01-2011 #4
Hmm, so did you machine them all in one operation? Or are you not disclosing how :naughty: I saw the other thread about it here a while ago.
By cylindrical I mean mine were just prisms. I did it in the lathe by offsetting the center and machining it three times.
Exactly - now use two pieces of perspex. That would be even more impressive.
-
21-01-2011 #5
My approach would be to turn the pointy bit and then basically part off the lightly curved face first roughing a relief down to maybe 10mm dia and then finishing the face and parting off the final 10mm in one go - if you get the tool shape right it should work ok.
Anywhere near? :-)
-
21-01-2011 #6
-
21-01-2011 #7
Maybe, getting warm :lol:
It will make it interesting for those that watch but do not participate in the threads to see how various minds work.
The piece is 48mm diameter and will not go through the headstock of my lathe.
So material cost has to be considered, it is not a secret in how i did it but just a bit of fun not to give the game away too easily. But i will let on if anyone gets close to my method.
Phil
-
21-01-2011 #8
Jonathan i have never heard anyone call a prism cylindrical before. :lol:
I would have tried rolling them on two pieces of perspex but as i made them for a customer i can't really get them all scratched can i.
They are on a thick towel as i was using a glass table and didn't want to explain to her indoors about any accidents. :whistling:
Phil
-
21-01-2011 #9
-
21-01-2011 #10
Last edited by M250cnc; 21-01-2011 at 04:58 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Youtube/Video Channel Thread?
By Washout in forum General DiscussionReplies: 2Last Post: 29-05-2014, 02:24 PM -
Just a little video i found
By totts in forum General DiscussionReplies: 5Last Post: 18-04-2014, 09:37 AM -
PCB Track Width Calculator
By irving2008 in forum General ElectronicsReplies: 0Last Post: 10-05-2013, 02:34 PM -
sanity check - constant running, loads and more
By dsc in forum Stepper & Servo MotorsReplies: 4Last Post: 26-11-2012, 12:26 PM -
Laser Diode Constant Current Driver
By Mad Professor in forum General ElectronicsReplies: 8Last Post: 21-07-2010, 06:01 PM
Bookmarks