Video of Solids of Constant Width

[Jonathan]

Jonathan i have never heard anyone call a prism cylindrical before. :lol:

I would have tried rolling them on two pieces of perspex but as i made them for a customer i can't really get them all scratched can i.

They are on a thick towel as i was using a glass table and didn't want to explain to her indoors about any accidents. :whistling:

Phil

Nor have I heard anyone call a solid of constant width a cylinder, but nevermind - I should have chosen a better word!

They must be aluminum then if there's a risk of getting them scratched.

Still thinking ...

[M250cnc]

Nor have I heard anyone call a solid of constant width a cylinder, but nevermind - I should have chosen a better word!

They must be aluminum then if there's a risk of getting them scratched.

Still thinking ...

Jonathan, Steve Mould called them Constants of Solid Width, i call em thingamabobs.

You are correct in that they are made from Aluminium.

They are very round as you can see from this poor photo, so cylindrical to me. :lol:

Phil

[Jonathan]

Maybe when parting off you held the piece in a revolving chuck in the tailstock. That would still leave a mark, so take that chuck and put it on the spindle and machine the other side? It should still be on center so that could work ... probably something a bit more ingenious though

Possible some sort of turning between centers was used ('save material').

I guess the question to ask is was it all machined in one operation or not?

[M250cnc]

Maybe when parting off you held the piece in a revolving chuck in the tailstock. That would still leave a mark, so take that chuck and put it on the spindle and machine the other side? It should still be on center so that could work ... probably something a bit more ingenious though

Possible some sort of turning between centers was used ('save material').

Very cold. :lol:

I guess the question to ask is was it all machined in one operation or not?

Clues, not every one had the same operations there are some subtle differences, so you now know there is more than one operation. :naughty:

:whistling: I'm enjoying this.

Phil