. .
Page 7 of 7 FirstFirst ... 567
  1. #61
    Doddy

    I will disassemble it later.
    Does PNC-3000 use quadrature encoder?
    If so, it would be easy to fix.

    magicniner

    That would be nice, but I want to run it without modifications first.
    If it's too difficult, I'll use raspberry pi or arduino to run it.
    I want to use it to make parts for machine.Maybe even make a model.I might even make a model.
    Maybe I will make a model someday.

    I think the PNC-3000 hardware is good and will be converted to CNC for use. Even if it cannot be fixed.

  2. #62
    Seriously, bypass the arduino/pi business, the cut down G-Code instruction set is a right hash-up and results in something you think is fine but that anyone with a decent controller wouldn't even consider.
    You think that's too expensive? You're not a Model Engineer are you? :D

  3. #63
    Quote Originally Posted by magicniner View Post
    Seriously, bypass the arduino/pi business, the cut down G-Code instruction set is a right hash-up and results in something you think is fine but that anyone with a decent controller wouldn't even consider.
    Ok, I'll do the conversion with a decent controller.

  4. #64
    Good afternoon ! Do you have service notes in electronic form?

  5. #65
    Quote Originally Posted by Deersaster View Post
    Good afternoon ! Do you have service notes in electronic form?
    I have become old since starting this conversation back in 2011. What I have and do not have is a complete mystery to me.

    There is a Roland PNC-3000 group on Facebook, you might try there.

    Robin

  6. #66
    I have a PNC-3200 that I may be going down a similar road with. I am missing the cable that connects the machine to the controller and I would like to test it out as it came before tearing into it.

    Can anybody help with a cable diagram/ pinout?

    Thanks!

Page 7 of 7 FirstFirst ... 567

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. NEW MEMBER: Yorkshire based modding / hacking noob says hello
    By dynamis_dk in forum New Member Introductions
    Replies: 8
    Last Post: 27-02-2014, 11:03 PM
  2. FOR SALE: Roland CAMM3 PNC-3000 Desktop Mill
    By danielbriggs in forum Items For Sale
    Replies: 4
    Last Post: 25-01-2012, 06:14 PM
  3. FOR SALE: For Sale! Roland PNC 3000 milling machine
    By fidia in forum Items For Sale
    Replies: 17
    Last Post: 26-07-2011, 10:07 PM
  4. NEW MEMBER: Hi From Oxfordshire - with Roland CAMM3 machine
    By rowifi in forum New Member Introductions
    Replies: 1
    Last Post: 15-02-2011, 05:04 AM
  5. Cheap for hacking
    By Robin Hewitt in forum General Discussion
    Replies: 12
    Last Post: 21-11-2008, 01:30 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •