Quote Originally Posted by M250cnc View Post
m_c is right.

But to cut large panels you need a dimension saw with a scribing blade these aren't gonna be cheap.

http://www.kelwoodmachinery.co.uk/in...FUgTfAodsVsfdQ

Then to cut a sheet of 8 x 4 you will need a working space of 20 feet minimum a good ceiling height to swing the panels around

To make the sides of your boxes you need to tongue and groove them, all doable on a table saw.

You should also have dust extraction

Its far easier to let someone else do all the work.

Then after laying out all that money who are you gonna blame if they are poor quality.

Phil
Hi
Poor quality is one of the issues I'm having to contend with at the moment. Production in the far east is problematic, quality control, lead time, communication, fluctuating exchange rates, etc. I'm now getting the urge to take responsibility for manufacture of key components. It will be a steep learning curve but I can't see how I would produce something worse than what I'm already getting.

Gavin