moving mach3 help please

[h4ppy-chris]

i have had to buy a new pc (faster) just for cnc.
i don't want to have to put mach on it and set it all up again.
is there away round this?

[audioandy]

Hi Chris

You can copy your profile XML file over from your old PC to your new one, but you still might have to retune your motors.

Andy

[h4ppy-chris]

Hi Chris

You can copy your profile XML file over from your old PC to your new one, but you still might have to retune your motors.

Andy

cheers andy
will that set the pins, steps and all?

[i2i]

you could for reference go into the original config screens and print a copy of them just in case the xml didn't configure correctly, at least then you would have a record of each setting.

[h4ppy-chris]

you could for reference go into the original config screens and print a copy of them just in case the xml didn't configure correctly, at least then you would have a record of each setting.

good idea i was gona wrigh them all down.

[audioandy]

Chris

You can print your XML file off and yes it will set all your I/O inc your motor pin config.

Andy

[h4ppy-chris]

thanks andy i will let you know how i get on.

[Lee Roberts]

Hummm, thinking maybe a quick little tool to back up and restore the MACH file(s) maybe in order ?

[h4ppy-chris]

sounds good to me.

[M250cnc]

Hummm, thinking maybe a quick little tool to back up and restore the MACH file(s) maybe in order ?

It's already been done

http://www.kd-dietz.com/klausphp/index_eng.htm

Goto software, downloads, MachProfile

It lets you backup, and even compare two profiles.

He makes the best Mach screen designer. MachScreen

Also a very good video plugin.

Phil

Sent from my HTC Desire using Tapatalk