Help with X3 mill and XML files

[m_c]

Have you tried the sample xml file from http://cnc4pc.com/Files/C11G_REV8_2.xml ?

[Eugene]

Have you tried the sample xml file from http://cnc4pc.com/Files/C11G_REV8_2.xml ?

Thanks for the reply, and yes I have tried the sample file from CNC4PC. That will not work, although the enable light on the board is lit. I think that there must be something that I am missing, such as the inputs to the board, do they have to be set to 0 or 5v?
Regards.
Eugene.