Thread: DIY CPU water cooler
Hybrid View
-
18-03-2011 #1
Last Activity: 15-03-2014
I have Intel Core2 6400, 2.13 GHz LGA775 Socket. Heatsink is original Intel supplied together with CPU. It's wholly aluminium. When running with few aps on average CPU temp is about 50C. After light 400 grit wet sanding a contact surface I would risk to say is more smooth than original heatsink.
-
18-03-2011 #2
Last Activity: 15-03-2014
Pics below shows a heat exchanger mount cut out from 3mm stell.
There is some more pictures & details of this project at my website:
http://malamuterun.co.uk/CPU%20water...ter_cooler.htm
-
22-03-2011 #3
Last Activity: 15-03-2014
Finally a clear pipe arrived today. I decided to try gravity circulating cooling system before I start to mess with any pump. At the moment of writing this a computer is on for more than an hour. Temperature of CPU is 33C. CPU usage is about the same like last time picture. So for now full success :dance:.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Do you need to water cool erhm a water cooled spindle?!!
By HankMcSpank in forum Generic Chinese SpindlesReplies: 18Last Post: 02-10-2013, 09:59 PM -
Cooling a water cooled spindle, without pipes everywhere & huge water tanks/buckets!
By HankMcSpank in forum Generic Chinese SpindlesReplies: 17Last Post: 18-09-2013, 06:32 AM -
Spindle Water Pump
By Tomnewry in forum Spindles & Drive MotorsReplies: 0Last Post: 11-08-2013, 01:05 PM
Bookmarks